Halfway with load securing holes
HOTSPRAY COATING - treatment HALFWAY WITH PERFORATED SIDES
- Paneling of the floor - with 9 mm birch plywood
- Paneling of the walls/sides - up till the ceiling - with 4-6 mm brown birch plywood with holes for load securement
- Seal and plaster all around for a seamless transition
- Sand down the paneling and equalize the screw holes
- Apply special adhesive primer to paneling
- Cover the entire outside of the car, cover inside of the car halfway down
- Apply special metal filament cutting tape to the coating borders
- Hotspray coating of the floor, wheel arches and sides halfway - with 2 to 3 mm Turbo Liner®
- Carefully remove metal filmament, unpack car and do finishing touches
With this treatment, you provide the loading space of your van with a custom-made plastic bedliner that will give you many years of enjoyment. In fact, Turbo Liner® is a guarantee for a high residual value!
Properties
- Material Turbo Liner® MPL11
- Color Grijs - Battleship Grey
- Thickness Approx. 2-3 mm
- Finish Antislip spray texture
Duration of treatment: ± 5 days